圣德科Santec MPM-210多端口光功计主机
Published on2026-06-17
Santec MPM-210是款高性能的多通道光功率计主机，是专门为高速、高精度的光器件次数设计的，应用在光纤通信、光电子器件研发及生产测试中，以下就是Santec MPM-210的参数及应用领域介绍。Santec MPM-210参数波长范围：1250-1650nm，覆盖C+L波段等通信常用波段功率动态范围：MPM-211/212模块：-80dBm至+10dBmMPM-215模块：-70dBm至+5dBmMPM-213电流计模块：-70dBmA至+10dBmA接口与通信：GPIB、Ethernet、RS-232C和USB接口触发与监控：支持TTL触发输入/输出，且提供0-3V的模拟功率监控输出。Santec MPM-210核心特点模块化设计主机支持最多安装5个模块，通过组合不同模块，最多可同时测量20个端口。高速测量能力支持高达100kHz的高速采样率，每个通道可记录多达100万个数据点，适合动态扫描测试 。高精度与低噪声具备高线性度和极低的偏振相关灵敏度，适用于插入损耗 (IL)、波长相关损耗 (WDL) 和偏振相关损耗 (PDL) 的精确测量 。实时补偿功能可与 Santec TSL 系列可调谐激光器配合，利用激光器的功率监视器输出，实时消除光源波动，实现高精度损耗测量 。Santec MPM-210适配模块MPM-211 / MPM-212：InGaAs 或 Si 光电二极管模块，用于常规光功率测量（4通道/模块）。MPM-213：电流计模块，用于直接测量光电探测器的输出电流（4通道/模块）。MPM-215：高灵敏度或特定动态范围的光功率模块 Santec MPM-210应用场景光器件测试：评估阵列波导光栅 (AWG)、波长选择开关 (WSS)、分路器等多端口器件的 IL、WDL 和 PDL 特性 。光纤通信系统监测：在多通道光纤链路中进行实时功率监控 。研发与校准：光电子器件的性能评估及光传感器的校准
Key Words：Santec MPM-210MPM-210MPM-210多端口光功计主机
Copyright and Disclaimer
1.This website reprints content from external sources (not from Shenzhen Haochen Electronic Technology) and clearly indicates the original source. The purpose of such reproduction is for informational exchange only and does not imply endorsement of the views expressed therein, nor does it assume responsibility for the accuracy or authenticity of the content. The website shall not bear any direct or joint liability for infringement arising from the use of such materials.
2.Any media outlets, websites, or individuals reprinting content from this website must retain the original source attribution as specified herein and assume full legal responsibility for copyright compliance and any related intellectual property matters.
3.If the article involves issues such as content or copyright, you may contact the publisher to offer your opinions or request its removal. Alternatively, you need to contact us within one week from the date of publication. Otherwise, it will be regarded as the waiver of relevant rights.