KEPCO ABC 10-10DM直流电源操作流程
Published on2026-05-08
KEPCO ABC 10-10DM 是一款具备程控功能的直流电源，支持数字键盘直接输入电压/电流参数，并可通过GPIB或RS232接口进行远程控制。1.开机准备连接电源输入线并确保接地良好，打开电源开关，设备自检后进入待机状态。2.本地手动操作使用前面板的数字键盘直接输入所需电压（0–10V）和电流（0–10A）值；按下“Set Voltage”或“Set Current”确认设置；按下“Output On/Off”键启动输出。3.远程控制（LabVIEW/SCPI）通过GPIB或RS232连接计算机；使用SCPI指令集发送命令，例如：VOLT 5.0（设置电压为5V）CURR 2.0（设置电流为2A）OUTP ON（开启输出）；支持外部触发和预设40组参数组合调用。4.保护功能启用可设置过压保护（OVP） 和 过流保护（OCP）；出现异常时自动切断输出，保障负载安全。5.存储与调用可将常用参数保存至内存，后续通过编号快速调用。
Copyright and Disclaimer
1.This website reprints content from external sources (not from Shenzhen Haochen Electronic Technology) and clearly indicates the original source. The purpose of such reproduction is for informational exchange only and does not imply endorsement of the views expressed therein, nor does it assume responsibility for the accuracy or authenticity of the content. The website shall not bear any direct or joint liability for infringement arising from the use of such materials.
2.Any media outlets, websites, or individuals reprinting content from this website must retain the original source attribution as specified herein and assume full legal responsibility for copyright compliance and any related intellectual property matters.
3.If the article involves issues such as content or copyright, you may contact the publisher to offer your opinions or request its removal. Alternatively, you need to contact us within one week from the date of publication. Otherwise, it will be regarded as the waiver of relevant rights.