吉时利Keithley 2500源表操作流程
Published on2026-04-17
吉时利Keithley 2500源表的操作流程主要包括连接电路、开机设置、选择恒流恒压模式、参数设定、校准、启动输出及监测等步骤，适用于精密电流或电压输出控制场景。1、连接电路：将源表输出端正确连接至待测器件，注意极性与量程匹配，避免短路或过载。2、开机启动：打开Keithley 2500电源开关，等待系统自检完成，进入主操作界面。3、选择输出模式：通过前面板按键选择“恒流源”（Constant Current）或“恒压源”（Constant Voltage）模式。4、设置输出参数：在恒流模式下，设定目标电流值（如100mA），确保在设备支持范围内（最大输出可达1A或10A，依配置而定）。在恒压模式下，设定目标电压值（最高可达200V）。5、校准与补偿（可选）：对高精度测量需求，可启用远程传感（Remote Sensing）和偏置补偿功能，提升输出稳定性。6、启动输出：确认设置无误后，按下“Output On”按钮，开始供电输出。7、实时监测：利用显示屏查看实际输出电流电压及功率状态，确保稳定运行。8、结束操作：测试完成后，先关闭输出，再断开电路连接，最后关闭电源。该流程适用于科研、半导体测试、材料特性分析等需要高精度源激励的场景
Key Words：Keithley 25002500源表吉时利2500
Copyright and Disclaimer
1.This website reprints content from external sources (not from Shenzhen Haochen Electronic Technology) and clearly indicates the original source. The purpose of such reproduction is for informational exchange only and does not imply endorsement of the views expressed therein, nor does it assume responsibility for the accuracy or authenticity of the content. The website shall not bear any direct or joint liability for infringement arising from the use of such materials.
2.Any media outlets, websites, or individuals reprinting content from this website must retain the original source attribution as specified herein and assume full legal responsibility for copyright compliance and any related intellectual property matters.
3.If the article involves issues such as content or copyright, you may contact the publisher to offer your opinions or request its removal. Alternatively, you need to contact us within one week from the date of publication. Otherwise, it will be regarded as the waiver of relevant rights.