安捷伦Agilent 86103A光电模块参数及安装步骤
Published on2026-04-10
安捷伦Agilent 86103A是款高性能的光通信测试模块，用在高速光信号的测量和分析中，应用在SDH/SONET、光纤通道和千兆位以太网等领域中，以下就是Agilent 86103A的参数及安装步骤介绍。Agilent 86103A参数光通道带宽：2.8GHz（支持多模光纤）电通道带宽：20GHz/12.4GHZ（支持3.5mm阳头输入）触发通道：2.5/12.5GHz波长范围：1000-1600nm灵敏度：低于﹣20dBm测试速率支持：SDH/SONET：155Mb/s、622Mb/s光通道典型RMS噪声：1μW（155/622Mb/s）和1.5 μW（1.063/1.250 Gb/s）电通道典型RMS噪声：0.25 mV（12.4 GHz）和0.5 mV（20 GHz）最大输入信号：±2Vdc兼容主机：86100A/B/C Infiniium DCA/DCA-J 系列示波器主机Agilent 86103A安装步骤确认主机兼容性确保使用的是86100A/B/C系列主机，并已关闭电源。防静电准备佩戴防静电手环，避免模块静电损伤。插入模块打开主机插槽盖板；将86103A模块对准插槽，平稳推入直至锁定。连接光缆使用符合波长范围（1000–1600nm）的光纤，连接至模块的光输入端口；确保连接牢固，避免弯折。连接电信号（如需）使用3.5 mm同轴电缆连接电通道输入；注意电压不超过 ±2Vdc。开机与识别开启主机电源；系统将自动识别模块并加载校准数据。软件配置在主机界面选择对应模块；根据测试需求设置滤波器模式（如SDH/SONET、光纤通道等）；启用参考接收机功能以提高一致性测试精度。
Key Words：Agilent 86103A86103A86103A光电模块
Copyright and Disclaimer
1.This website reprints content from external sources (not from Shenzhen Haochen Electronic Technology) and clearly indicates the original source. The purpose of such reproduction is for informational exchange only and does not imply endorsement of the views expressed therein, nor does it assume responsibility for the accuracy or authenticity of the content. The website shall not bear any direct or joint liability for infringement arising from the use of such materials.
2.Any media outlets, websites, or individuals reprinting content from this website must retain the original source attribution as specified herein and assume full legal responsibility for copyright compliance and any related intellectual property matters.
3.If the article involves issues such as content or copyright, you may contact the publisher to offer your opinions or request its removal. Alternatively, you need to contact us within one week from the date of publication. Otherwise, it will be regarded as the waiver of relevant rights.