安立Anritsu MP1800A误码分析仪参数
Published on2026-03-23
安立Anritsu MP1800A是款高性能、模块化的信号质量分析仪，主要用于高速光通信和集成电路的误码率（BER）及信号完整性测试，广泛应用于科研、实验室和高端制造场景，以下就是Anritsu MP1800A的参数介绍。Anritsu MP1800A参数误码率测试范围：基础范围：0.1Gbit/s-32.1 Gbit/s外接MUX/DEMUX（如MP1821A/MP1822A）时：最高支持64.2Gbit/s信号生成能力（PPG 模块）：上升/下降时间：12ps（20%–80%）输出抖动（峰峰值）：8ps p-p输出幅度：最高3.5Vp-p支持PAM信号：最高32.1Gbaud的4PAM/8PAM信号生成误码分析（ED 模块）：输入灵敏度：典型值10 mV（超高灵敏度）支持眼图分析：包括浴盆曲线（Bathtub）、Q 因子、ISI、抖动容限等抖动生成与容限测试：支持抖动类型：SJ（确定性抖动）、RJ（随机抖动）、BUJ（带宽限制抖动）、SSC（展频时钟）、双音 SJ、半周期抖动最大SJ调制深度：2000UI最高调制频率：250 MH（此时可输出1UI振幅SJ）固有抖动：275 fs rms（额定）加重功能：外接 MP1825B 可实现四阶预加重，用于补偿高速链路损耗，支持 CEI-28G、32G FC、InfiniBand EDR等标准多通道支持单台最多支持32个信道同步测试（适用于AOC、CFP、QSFP+ 等多通道模块）PPG/ED模块可选1ch/2ch/4ch配置时钟恢复：内置时钟恢复选项，支持无时钟设备（如AOC）的BER测量物理接口与扩展：槽位数：6 槽显示屏：8.4 英寸彩色 TFT（800×600 像素）远程接口：GPIB（选件 MP1800A-001）、LAN（2 端口，选件 MP1800A-002）尺寸/重量：320(W) × 177(H) × 450(D) mm，≤13kg
Key Words：Anritsu MP1800AMP1800AMP1800A误码分析仪
Copyright and Disclaimer
1.This website reprints content from external sources (not from Shenzhen Haochen Electronic Technology) and clearly indicates the original source. The purpose of such reproduction is for informational exchange only and does not imply endorsement of the views expressed therein, nor does it assume responsibility for the accuracy or authenticity of the content. The website shall not bear any direct or joint liability for infringement arising from the use of such materials.
2.Any media outlets, websites, or individuals reprinting content from this website must retain the original source attribution as specified herein and assume full legal responsibility for copyright compliance and any related intellectual property matters.
3.If the article involves issues such as content or copyright, you may contact the publisher to offer your opinions or request its removal. Alternatively, you need to contact us within one week from the date of publication. Otherwise, it will be regarded as the waiver of relevant rights.