FiberLabs AMP-FL8611-0B光纤放大器参数
Published on2026-03-18
FiberLabs AMP-FL8611-0B是款转为O波段设计的光纤放大器，应用于高速光通信、科研测试和生物成像等领域中，具有高增益、高输出功率和低噪声等优势，以下就是FiberLabs AMP-FL8611-0B的参数介绍。FiberLabs AMP-FL8611-0B工作波长范围：1280-1320nm最大输出功率：标准型号为＞20dBm，高功率型号为≥23dBm小信号增益：典型值为大于35dB，部分低功率型号为≥10dB噪声系数：≤7dB控制模式：ACC/ALC远程控制接口：RS-232C和GP-IB输入/输出光纤：SMF光连接器：FC/PC尺寸：88×430×350nm重量：7kg供电：AC 100-240V，50/60Hz消耗：低功率＜30W，高功率＜50W。以上就是FiberLabs AMP-FL8611-0B光纤放大器参数，有需要购买或租赁的朋友可随时联系晧辰电子科技。
Key Words：AMP-FL8611-0B光纤放大器
Copyright and Disclaimer
1.This website reprints content from external sources (not from Shenzhen Haochen Electronic Technology) and clearly indicates the original source. The purpose of such reproduction is for informational exchange only and does not imply endorsement of the views expressed therein, nor does it assume responsibility for the accuracy or authenticity of the content. The website shall not bear any direct or joint liability for infringement arising from the use of such materials.
2.Any media outlets, websites, or individuals reprinting content from this website must retain the original source attribution as specified herein and assume full legal responsibility for copyright compliance and any related intellectual property matters.
3.If the article involves issues such as content or copyright, you may contact the publisher to offer your opinions or request its removal. Alternatively, you need to contact us within one week from the date of publication. Otherwise, it will be regarded as the waiver of relevant rights.