FIBERLAB AMP-FL8611-OB-16光纤放大器参数及应用场景
Published on2026-03-12
FIBERLAB AMP-FL8611-OB-16是款专门为1300nm的O波段通信窗口设计的台式光纤放大器，应用在光通信链路、数据中心互和科研测试等领域中，以下就是FIBERLAB AMP-FL8611-OB-16的参数及应用领域介绍。FIBERLAB AMP-FL8611-OB-16参数波长：1280-1320nm，完全覆盖了O波段低色散窗口。输出功率：＞﹢16dBm（大约40mW），有部分资料显示在特定的情况下最大的输出功率可以达到100mW（﹢20dBm）信号增益：＞20dB，在低输入功率的情况下可以提供到35dB的增益能力。噪声系数：＜7dB，确保信号在放大过程中的高信噪比控制模式：ACC和ALC模式，能适应不同链路的需求监控功能：实时监测输入/输出功率、激光二极管（LD）电流与温度、机箱温度，具备输入功率警告及远程互锁保护功能。接口：FC/PC 光纤连接器，RS-232C和GPIB (IEEE488.2) 远程控制接口尺寸和重量：88×430×350mm，重约为7kgFIBERLAB AMP-FL8611-OB-16应用领域光通信系统同于电信和数据通信网络中的信号中断及放大，在100G/400G/800G高速光通信系统中补偿链路的损耗。科研和测试是实验室的标准光源放大设备，适用光纤传感、量子光学适应和各类电器件的测试。自动化集成可以远程编程控制，能轻松的集成到自动化测试平台和工业监控系统中。模拟信号传输凭借低失真特性，适用CATV及模拟光纤链路的信号增强。
Key Words：AMP-FL8611-OB-16光纤放大器
Copyright and Disclaimer
1.This website reprints content from external sources (not from Shenzhen Haochen Electronic Technology) and clearly indicates the original source. The purpose of such reproduction is for informational exchange only and does not imply endorsement of the views expressed therein, nor does it assume responsibility for the accuracy or authenticity of the content. The website shall not bear any direct or joint liability for infringement arising from the use of such materials.
2.Any media outlets, websites, or individuals reprinting content from this website must retain the original source attribution as specified herein and assume full legal responsibility for copyright compliance and any related intellectual property matters.
3.If the article involves issues such as content or copyright, you may contact the publisher to offer your opinions or request its removal. Alternatively, you need to contact us within one week from the date of publication. Otherwise, it will be regarded as the waiver of relevant rights.